Sahara Force India ran a new front end in testing, with some of the distinctive features from the launch car dropped. The new set up is aimed redirecting the flow along the edges of the nose towards the floors lower leading edge. The new package consists of; a revised nose tip, front wing pylons and different turning vanes.
The team also ran a revised sidepod package with McLaren style exhaust outlets. I will cover this development in a separate post.
From the cars launch and through the first four races, the nose tip sported a hammer-head style twin camera set up. Now the cameras have relocated to further back along the nose and the nose tip now forms a more aesthetically pleasing rounded shape. Although neutral in aero section, the camera pods are placed in a position where their shape will interact with the airflow to create some aero benefit downstream on the car.
Below this the pylons mounting the front wing have been extended and form a linger vane like shape. This was something FIF1 have worked with a lot over the past few seasons. Using this shape as part of the cars aero set up for different speed\downforce circuits. Typically longer pylons for higher downforce tracks and smaller pylons for places like Monza. Although the vanes may well create some low pressure behind the neutral front wing centre section to create load at the front axle, I expect they are more for directing the airflow along the y250 axis. This is a longitudinal line along the edge of the chassis, 250mm from the cars centre line. This is effectively as far outboard aero devices are allowed and hence where teams tend to focus on vane development. Creating different flow structures along this axis, helps creates the airflow distribution at the floors lower leading edge which is critical to diffuser efficiency.
Along similar line are the new turning vanes, on the launch car these were the popular “L” shaped hanging vanes (pictured above), mounted beneath the nose cone. Now they are a pair of curved vanes under the front suspension, a similar solution to Sauber\Renault and adopted by Red Bull last year. Again similar to these teams there is a small split in the vane to induce a stronger vortex effect along the y250 axis.