When Red Bull Racing launched their new car for 2011, the event was marked by a very special press pack. The pack was formatted in the style of the well-known Haynes maintenance manuals (PDF). This in itself this was a great book, but almost unnoticed within its pages was the intended publishing of a complete Haynes style workshop manual on the RB6 car.
Now some six months later the Haynes Red Bull Racing F1 Car Owners Workshop Manual (RB6 2010) has been published. As its rare a Technical F1 book is published, not least one with insight into such a current car, I’ve decided to review the book in detail.
At 180 pages long the book has enough space to cover quite a wide range of topics and it does so. Starting with a background to the team, moving on to the cars technology, to overviews of its design and operation. With its familiar graphical style and hardback format it certainly gives the feel of a proper workshop manual. However this is somewhat skin deep and the pages within, soon revert to a more typical book on F1, although some flashes of the Haynes style do remain.
Steve Rendle is credited as the writer of the book and Red Bull Racing themselves have allowed close up photography of the car and its parts, as well as providing a lot of CAD images.
But clearly a lot of editing has been carried out by Red Bull Racing and the book falls short of its presentation as a manual for the RB6. Despite its confusing title, the book is probably better described as a summary of contemporary F1 technology from the past 3 years.
As the last in depth technical F1 book was the heavy weight title from Peter Wright showcasing Ferraris F1 technology from 2000, this remains a useful source of recent F1 technology.
This places the books target audience, somewhere between the complete novice and those already of a more technical mindset.
With forewords by Christian Horner and Adrian Newey, the opening 21 pages are a background to the team and detail of the 2010 season that brought RBR the championships. Then starts the core 100 page chapter on the cars anatomy, which opens with a pseudo cutaway of the car showing a CAD rendering of its internals.
Firstly the monocoques design and manufacture is covered, with images of the tubs moulds being laid up and CAD images of the RB4 (2008) chassis and its fuel tank location. Although little is made of the fuel tank design.
Moving on to aerodynamics, the text takes a simplistic approach to explaining aero, but there is an interesting illustration of the cars downforce distribution front to rear. This does highlight the downforce created by the wings and diffuser, but also the kick in downforce at the leading edge of the floor, but this is not adequately explained in the text. Mention is made of the front wing and the flexing that RBR deny, this is explained with a simple illustration showing the deflection test. The driver adjustable front flap, which was legal during 2009-2010 seasons, is explained, in particular that the wing was hydraulically actuated. When I understood that in 2009, only Toyota used a hydraulic mechanism over the electric motor system used by all other teams. In trying to explain the nose cone, the text and an illustration show a high nose and low nose configuration, but does not remark why one is beneficial over the other.
This section also covers very brief summaries of bargeboards, sidepods and the floor. Some nice close up photos of these parts included, but again with little explanation. An illustration at this point highlights the other FIA deflection test altered in 2010, which was aimed at Red Bulls alleged flexing T-Tray splitter. In this section the text cites Ferraris sprung floor of 2007, but not the allegation that RBR’s was flexing in 2010. A further simple graphic illustrates the venturi effect of the floor and diffuser, and then the text goes into simple explanations of both the double diffuser and the exhaust blown diffuser.
Having been one of the technical innovations of 2010 and since banned, the book is able to cover the F-Duct is some detail. A complete CAD render of the ducting is provided on page 53; this shows an additional inlet to the drivers control duct that was never visible on the car. This extra duct served the same function as the nose mounted scoop on the McLaren that introduced the F-Duct to F1.
Thus with aerodynamics covered in some 23 pages, the text moves onto suspension and the expectation of detail on the RB5-6′s trademark pullrod rear suspension. After a summary of the purpose of an F1 cars suspension, Pages 58-59 have some fantastic CAD renderings of front suspension, uprights and hub layouts. However the rear suspension rendering stops short at the pull rod and no rocker, spring, damper layouts are detailed. Hardly a secret item, so lacking this detail is let down for a book announced as an RB6 workshop manual. A lesser point, but also highlighting the censorship of some fairly key technical designs, was the lack of any reference to Inerters (Inertia or J-Dampers), The suspension rendering simply pointing to the inerter and calls it the ‘heave spring’, while naming the actual heave spring damper as simply another ‘damper’. Inerters have been in F1 since 2006, predating Renault’s mass damper. Their design and purpose is well documented and shouldn’t be considered something that needs censoring. It’s also this section that fails to showcase the RB5-6 gearbox case. Instead using a pushrod suspended RB4 (2008) gearbox, albeit one made in carbon fibre.
The steering column, rack and track rods are similarly illustrated with CAD images. This usefully shows the articulation in the column, but little of the hydraulic power assistance mechanism. Page 67 starts the section on brakes, again fantastic CAD images supply the visual reference for the upright, brake caliper and brake duct design. As well as a schematic of the brake pedal, master cylinder and brake line layout of the entire car. A nod to more typical Haynes manuals shows the removal of the brake caliper and measure of the Carbon disc\pad. A further CAD image shows the brake bias arrangement with both the pivot at the pedal and the ratchet control in the cockpit for the driver to alter bias.
Although not a RBR component the Renault engine is covered in the next Chapter. An overview of the complex engine rules regarding the design and the specification freeze kicks off this section and cites the tolerances and compression ratio for a typical F1 engine. Pneumatic valves, for along time an F1-only technology are explained, but even I failed to understand the schematic illustrating these on page 77. Also covered in the engine section is some more detail on the fuel, oil and cooling systems. With useful specifics, like capacity of the oil system at 4 litres and water coolant at 8 litres. Again some nice CAD images illustrate the radiators within the sidepod. Many sections have a yellow highlighted feature column; this sections feature is on the engine start up procedure, one of the mundane, but rarely talked about processes around an F1 car (other features are on the shark fin and brake wear). As KERS wasn’t used up until 2011, this topic is skipped through with a just a short explanation of the system.
Moving rearward to the transmission system, the old RB4 gearbox makes a reappearance. Again this disappoints, as some quite common F1 technology does not get covered. Page88 shows some close up photos of a gear cluster, but this is not a seamless shift gearbox. In fact seamless shift isn’t mentioned, even though it made its RBR debut in 2008, the year of the gearbox showcased in the book. I know many will highlight that this might be a secret technology. But most teams sport a dual gear selector barrel, each selector looking after alternate gears to provide the rapid shift required to be competitive in F1. So I think this is another technology that could be explained but hasn’t been.
Tyres, Wheel and Wheel nuts get a short section, before the text moves onto electronics. A large part of the electronic system on a current F1 car is now standardised by the Single ECU (SECU) and the peripherals that are designed to support it. So this section is unusually detailed in pointing out the hardware and where it’s fitted to the car. From the tiny battery to the critical SECU itself. Other electronic systems are briefly described from the Radio, drivers drink system to the rain light.
Of critical importance to the modern F1 car are hydraulics, which are detailed on p105. As with the other sections, CAD images and some photos of the items themselves explain the hydraulic system, although there isn’t a complete overview of how it all fits together.
Rounding off the anatomy chapter is the section of safety items and the cockpit. The steering wheel and pedals are well illustrated with CAD drawings and keys to the buttons on the wheel itself and on the switch panel inside the cockpit.
While I have pointed that the hardware shown in the anatomy chapter isn’t necessarily of the RB6, what is on show is obviously genuine and recent RBR. So for those not so familiar with the cars constituent parts, there isn’t a better source of this available in print today. Even web resources will fail to have such a comprehensive breakdown of an F1 car.
The Designers view
Moving away from the Haynes format of a workshop manual, the book then moves into a chapter on the cars design, with comments from Adrian Newey. It details the Design Team structure and some of the key individuals are listed. The text then covers the key design parameters; centre of the gravity and the centre of pressure (downforce). Plus the design solutions used to understand them; CFD, Wind Tunnels and other simulation techniques. Each being briefly covered, before similar short sections on testing and development close this chapter.
Although the text makes reference to creating ‘the package’, something Newey excels at. This section doesn’t provide the insight into the overall design philosophy, which one might have hoped for.
The Race Engineers view
Where as the Designers view chapter was limited, the race Engineers section was a little more insightful into the rarely talked about discipline of getting the car to perform on track. The process of setting up the car is covered; from the understanding of the data, to the set up variables that the race engineer can tune; suspension, aero, ballast, gearing brakes and even engine. Usefully the grand prix weekend is broken down onto the key events from scrutineering, to running the car and the post race debrief. Feature columns in this chapter include; Vettels pre race preparation and the countdown to the race start.
The Drivers view
Ending the book is an interview style chapter on the driver’s time in the car, mainly the driver’s perspective from within the cockpit when driving the car on the limit and the mindset for a qualifying lap. A simplistic telemetry trace of a lap around Silverstone is illustrated, although there is little written to explain the traces (brakes, speed and gear), this is accompanied by Mark Webbers breakdown of a lap around the new Silverstone circuit.
When I first got this book, I was constantly asked if it was worth the purchase or if I’d recommend it. If my review is critical at points, it’s mainly because some technology that could have been covered wasn’t. Or, that the content falls short of the books title suggesting it was a manual for the RB6.
Those points aside, I have learnt things from this book. Like details of the F-duct system, the Front Flap Adjuster and a wealth of smaller facts. There isn’t a better book on the contemporary F1 car. In particular the CAD drawings and close-up photos, just simply aren’t in the public domain. From the pictures we got over the race weekends, we never get to see half the hardware and design work that’s pictured in this book. So I’ll keep this book on hand for reference for several seasons to come.
Overall I’d recommend this book to anyone with a technical interest in F1.
Many thanks to Haynes Publishing who have allowed me to use their Images and PDFs to illustrate this article
This book is available from Haynes